How to use a automatic soap dispenser

Components of an Automatic Soap Dispenser

An automatic soap dispenser is a device that dispenses a controlled amount of soap solution or a similar liquid such as hand sanitizer. It is often used in public restrooms in conjunction with automatic faucets to conserve the amount of soap used and stem infectious disease transmission.

The dispenser is fitted with motion sensors that detect the motion of the hands or infrared energy emitted by one’s body heat.

Once the sensor is activated, the device dispenses a pre-programmed amount of soap.

The three key components of an automatic soap dispenser are the PIR sensor, pump, and power source.

PIR Sensor: The PIR sensor detects infrared energy that is emitted by one’s body heat. When hands are placed in the proximity of the sensor, the infrared energy quickly fluctuates, triggering the pump to activate and dispense the designated amount of soap.

Pump: The pump is responsible for dispensing the soap solution.

Power Source: The power source provides the energy needed to operate the dispenser.

Automatic soap dispensers are beneficial in maintaining a sanitary environment in public restrooms. They help limit cross-contamination and the spread of illness, and they promote a more organized and sanitary environment.

They also help reduce soap consumption, which means infrequent refills and maintenance, saving on labor and custodial costs.

The mechanisms of the dispenser that work for soap may also work for other liquids such as hand sanitizer.

Installing batteries in an automatic soap dispenser

Locate the battery compartment, which may be on the bottom, back, or side of the dispenser.

Open the battery compartment with a screwdriver or key, if necessary.

Insert AA or AAA batteries with the positive and negative ends facing the correct direction.

Close and secure the battery compartment.

Remember that batteries may need to be replaced periodically, depending on the model and volume of use. In most cases, batteries last for one to two years. When it’s time to replace them, simply follow the same installation process.

Filling the Soap Reservoir of an Automatic Soap Dispenser

Here are some ways to fill the soap tank:

Top Filling Mechanism: Some models have a top filling cover that can be opened using a special key provided. Pour the soap in the tank and close the cover. The LED incorporated in the top filling cap indicates the soap levels.

EZ Fill™ Vanity Mounted Top Fill Port: Other models have a top-fill system that allows refill of up to six soap dispensers with one pour. The soap supply shall be from this port and multi-feed tank.

It is crucial to use the right soap for automatic soap dispensers. Make sure to use soap within the viscosity and pH range specified by the manufacturer. Some dispensers may require diluting the hand soap with water before filling the reservoir to ensure that it foams.

To avoid moisture and liquid damage, remove the battery before filling the soap reservoir.

Adjusting the Soap Dispensing Amount on an Automatic Soap Dispenser

Automatic soap dispensers come with adjustable knobs or buttons that allow you to control the amount of soap dispensed. Some models have a visible dial or adjustment button, while others have a timing knob.

To adjust the soap volume control, simply turn the knob or press the button to increase or decrease the soap amount.

Amazon’s smart soap dispenser has three soap dispensing levels that depend on how far your hand is from the nozzle. The dispenser releases the preset amount of liquid or foam soap from the nozzle spout when your hand is within the sensing range.

To obtain additional soap, withdraw your hand and place it below the dispenser spout again.

If the soap dispenser is not dispensing the optimal amount of soap, it may be due to an empty or incorrectly loaded refill cartridge. To correct this, replace the refill cartridge. Soap residue buildup on the nozzle or spout may also create a poor seal and cause soap dripping.

In this case, replace the cartridge.

To summarize, adjusting the soap dispensing amount on an automatic soap dispenser is simple. Turn the knob or press the button to increase or decrease the soap volume control. Some models have three soap dispensing levels that depend on how far your hand is from the nozzle.

If the dispenser is not dispensing the optimal amount of soap, it may be due to an empty or incorrectly loaded refill cartridge or soap residue buildup on the nozzle or spout.

How to Operate an Automatic Soap Dispenser

To turn on the dispenser, place your hands under the nozzle within the sensor range. The sensor detects motion or body heat and sends a signal to the pump to dispense soap in pre-measured amounts.

The amount of soap dispensed is predetermined and set in increments.

To turn off the dispenser, simply remove your hands from the sensor range.

If the dispenser is not working, try priming it by placing your hand under the sensor for a moment and then removing it. Repeat this process multiple times until soap dispenses.

Automatic soap dispensers are commonly used in public restrooms to conserve soap and prevent the spread of germs. They can also be useful in homes, especially in the kitchen, to dispense soap without touching the dispenser and making a mess.

Tips for Cleaning and Maintaining Your Automatic Soap Dispenser

How to Make Your Own Foaming Hand Soap

Tip: Turn on the caption button if you need it. Choose ‘automatic translation’ in the settings button if you are not familiar with the english language. You may need to click on the language of the video first before your favorite language becomes available for translation.